AJA Ki-Pro Portable Video Recorder w/250GB Module And High Speed KiStor Dock

Description

AJA Ki-Pro Portable Video Recorder in perfect condition w/250GB Module And High Speed KiStor Dock.
There’s no substitute for the original Ki Pro. We’ve tried all the others. This unit was used as a backup and is in great condition but we no longer need it. Our loss is your gain!
Condition is Used. Shipped with FedEx or UPS internationally.
Video Formats
525i 29.97
625i 25
720P 23.98, 25, 29.97, 50, 59.94, 60 (Note: 720p 23.98 (24), 720p 25 and 720p 29.97 require a valid camera source and the use of the Record Type>VFR selection)
1080i 25, 29.97, 30
1080PsF 23.98, 24, 25, 29.97, 30
1080PsF 23.98, 24, 25*, 29.97* (Note: 25 and 29.97 require a valid camera source and the use of the Record Type>PsF selection)
1080p 23.98, 24, 25, 29.97
Codec Support
Apple ProRes 422
Apple ProRes 422 (HQ)
Apple ProRes 422 (LT)
Apple ProRes 422 (Proxy)
Removable Storage
AJA Ki Stor modules - 1 slot
ExpressCard/34 - 2 slots (Only Slot 1 active, See www.aja.com for supported media)
Video Input Digital
SD/HD SDI, SMPTE-259/292/296, 10-bit
Single Link 4:2:2 (1 x BNC)
HDMI v1.1
Video Input Analog
SD/HD Component (3 x BNC)
SMPTE/EBU N10, Betacam 525 line, Betacam 525J
12-bit A/D, 2x oversampling
+/- .25 dB to 5.5 MHz Y Frequency Response
+/- .25 dB to 2.5 MHz C Frequency Response
.5% 2T pulse response
<2 ns Y/C delay inequity
Video Output Digital
SD/HD SDI, SMPTE-259/292/296, 10-bit
Single Link 4:2:2 (1 x BNC)
HDMI v1.1
Note: HDMI requires 1080i, 720p or 1080p to be active; HDMI does not provide support for PsF
Video Output Analog
Composite (1xBNC)
NTSC, NTSCJ, PAL
12-bit D/A, 8x oversampling
+/- .2 dB to 5.0 MHz Y Frequency Response
+/- .2 dB to 1 MHz C Frequency Response
.5% 2T pulse response
<1% Diff Phase
<1% Diff Gain
Note: Composite output requires that the Component Analog output be set to SD; composite output does not support HD
Component (3 x BNC)
HD: YPbPr, RGB
SD: YPbPr, RGB (component mode)
SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
12-bit D/A, 8x oversampling
+/- .2 dB to 5.5 MHz Y Frequency Response
+/- .2 dB to 2.5 MHz C Frequency Response
.5% 2T pulse response
<1 ns Y/C delay inequity
Audio Input Digital
2-channel or 8-channel user selectable
8-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
2-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous
Audio Input Analog
2-channel, 24-bit A/D analog audio, 48kHz sample rate, balanced (2 x XLR)
Input level: Line, Mic, Mic+phantom 48Vdc
+24dbu Full Scale Digital
+/- 0.2db 20 to 20kHz Frequency Response
2-channel unbalanced (2 x RCA)
Audio Output Digital
8-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
2-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous
Audio Output Analog
2-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (2 x XLR)
+24dbu Full Scale Digital (0dbFS)
+/- 0.2db 20 to 20kHz Frequency Response
2-channel unbalanced (2 x RCA)
Stereo unbalanced headphone (1 x 3.5mm mini jack)
Up-Conversion
Hardware 10-bit
Anamorphic: full-screen
Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars
Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
Zoom Letterbox: results in image zoomed to fill full screen
Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting can introduce a small aspect ratio change
Down-conversion
Hardware 10-bit
Anamorphic: full-screen
Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
Crop: image is cropped to fit new screen size
Cross-conversion
Hardware 10-bit
1080i to 720P
720P to 1080i
Timecode
SDI RP188/SMPTE 12M via SDI BNC
LTC input (1 x BNC)
LTC output (1x BNC) (Note: active during playback not during record or EE)
Network Interface
10/100/1000 Ethernet (RJ-45)
802.11g Wireless
Embedded web server for remote control
Computer Interface
IEEE1394b/FireWire800
User Interface
2 x 20 character display, with dedicated buttons
Control
LANC Loop (2 LANC Connectors) (Note: requires a LANC enabled camera)
Lens Tap (Note: Not activated)
IEEE-1394a/FireWire400 for control and timecode data
Physical
Width: 9.00" (22.86cm)
Depth: 6.12” (15.56cm) from front antenna cover to back of handles
Height: 3.25" (8.25cm)
Power: 100-240 VAC 50/60Hz (adapter), 12-18Vdc 4-pin XLR (chassis), 3.3A max, 30W typical
Weight: 3.7 lb. (1.67kg)